O Scale - KVD

O Scale

O-scale Kit # 201 Straight Stairs w/Landing.................$11.95

This kit will get your scale people to the second floor of most older buildings. This kit measures 14'-8" tall from the bottom of stairs to the top of the landing and measures 16'-8" from the back of the landing to the front of the stairs. The stair treads are 36" wide. Each kit includes a stair jig to build your stairs square. All railings and railing caps are included with the kit. Each kit is made from 1/32" aircraft plywood for more strength and less warp age. The stairs are designed to be built either left hand or right hand (left hand shown in picture). Detailed instructions for assembly are included in kit.

O-scale Kit # 202 U-shaped stairs w/landings............$11.95

If you have a tight place, but still need a stairway, this nifty little stair kit might be the answer. This stairway measures only 13'-4" wide x 12'-8" tall and 6'-0" deep (not including the hand rails). Each kit includes a stair jig and all materials to build this kit (including the legs). You can build this kit either left hand or right hand (left hand shown in pictures). Detailed instructions for assembly are included with kit.

O-scale Kit # 203 One pair of stairs w/out landings.......$11.95

Do you need just some plain stairs? This might help you. The picture shows the stairs with left and right hand railings, but you can build the both left or right. Stairs measure 16'-0" from the bottom to the top tread and 16'-0" wide from the back of the stairs to the front. The stairs are 36" wide, not including the railing. Each kit includes a stair jig and all materials you need to build these stairs.

O-scale Kit # 204 L-shaped Stairs with.............$11.95

Introducing our new "L" shaped stairs. This stair kit comes with all the pieces needed to build these stairs left hand, right hand, inside or out side. We've even included the "X" bracing in each kit. And of course, the kit comes with our stair jig to help you build straight and square stairs. The stairs measure 12'-4" wide, x 12'-8" tall x 9'-0" deep.

O-scale Kit # 210 Eight (8) Warehouse/Freight House Door......$14.95

This kit has 4 - 8ft. x 8ft. doors (2 of them are double doors) and 4 - 6ft. x 8ft. doors ( 2 of them are double doors). The panels and frames are laser cut from 1/32" aircraft plywood. The frames are "peel and stick" that have an ultra thin adhesive that become stronger over time. We designed these door to be used for brick, stone, or wood structures. All you have to do is to add the hardware.

O-scale Kit # 230 Five (5) Assorted Vents................$6.95

For the scratch builder, 5 different wood vents for your buildings. The vents are cut from 1/32" aircraft plywood